Enterasys Networks RBT-1602 Mounting the Antenna to a Wall

Mounting the Antenna
3-24 Antenna Installation
3. Situatetheantennabracketagainsttheantenna,sothattheendagainsttheantennapivotsin
thesameplaneasthedesiredpolarization.Forexample,ifusingverticalpolarization,this
antennabracketendshouldpivotupanddown.Ifusinghorizontalpolarization,thisantenna
bracketendshouldpivotfromside‐to‐side.
4. Usethefour(yellow)hexnuts,tosecuretheantennabrackettothebackoftheantenna.
5. Rotatethepivotofthebracketendattachedtotheantennatoadjusttheantennaposition.
Lockbracketindesiredpositionbytighteningnutsoneithersideofbracketendwith
wrenches.
Mounting the Antenna to a Wall
Figure 3‐12illustrateshowtoattachthe5.8GHzpanelantennatoawall.Tabl e 3‐11liststhe
componentsforthisprocedure.
Figure 3-12 Mounting the RoamAbout 5.8 GHz Panel Antenna to a Wall
Table 3-11 RoamAbout 5.8 GHz Panel Antenna Wall Mounting Components
#Component
1 Antenna (RBTES-AH-P23M)
2 Antenna bracket
3Wall
4 Screw holes in wall
5 Screws for attaching antenna to the wall (user supplied)
1
2
3
4
5