Secondary Installation
LOG SET AND EMBER INSTALLATION:
NOTE: The logs are fragile and should be handled gently.
The placement of the logs is not arbitrary. If they are positioned incorrectly, the flames can be “pinched” and will not burn correctly. The burner, and a few of the logs come with locator pins, notches and ledges, which make alignment easier. Using the pictures provided, carefully set the logs in place (see Figures 24 through 29).
Figure 24: The first log to be placed is the back log. It leans on the back of the firebox, push it back as far back as you can.
Figure 24. Empty firebox with grate and locator pins.
Figure 25. First Stage Log Set Installation.
Figure 26. Second Stage Log Set Installation.
Figure 25: The left log and the right log both have two
(2)holes in them that will rest over their corresponding two
(2)locator pins pointed out in Figure 24.
Figure 26: The bottom of the left/center log will rest over the locator pin on the burner and against the grate. The top half of the log must rest against the back log, see Figure 25. The center spot shown in Figure 25 is a knot in the back log for the left/center log to rest against. Ensure the log does not block any burn ports.
20
