Secondary Installation
Figure 27: The front end of the right/center log has a notch in it that is to rest around the right/center post of the grate. The back end of the log rests on the burner tray (see Figure 26). Ensure the log does not block any burn ports.
Figure 27. Third Stage Log Set Installation.
Figure 28. Fourth Stage Log Set Installation.
Figure 29. Fifth Stage Log Set Installation.
Figure 28: Once the logs are in position the provided rock wool can be placed irregularly in front of the burner.
Figure 29: Place the embers irregularly onto and around the front of the burner to create a realistic look. The ceramic fiber comes in chunks that can be ripped into smaller pieces.
WARNINGS: DO NOT pack this ember material as this could create an unsafe condition. The pieces should be lightly placed so they don’t block any of the burner ports.
DO NOT allow any of the embers to rest against the pilot assembly.
Caution: Use only the type of ember material supplied with this fireplace. Due to the irregular size of the ember material, there may be more than required. Use of other foreign materials on the burners may create dangerous conditions.
21
