Enviro 50-927, C-10791 owner manual What To Do If You Smell Gas, For Your Safety

Models: 50-927 C-10791

1 35
Download 35 pages 2.68 Kb
Page 1
Image 1
D I R E C T V E N T F I R E P L A C E

SHERWOOD INDUSTRIES IS AN ENVIRONMENTALLY RESPONSIBLE COMPANY. THIS MANUAL IS PRINTED ON RECYCLED PAPER.

PLEASE KEEP THESE INSTRUCTIONSDV36FOR FUTURE REFERENCE

D IOWNER’S MANUALWHAT TO DO IF YOU SMELL GAS R EFOR YOUR SAFETY50-927 C T V EManual backgroundManual background N T FManual backgroundManual background IManual backgroundManual background R EManual backgroundManual background P LManual backgroundManual background A C EManual backgroundManual background

B Y :Manual backgroundManual background S HManual backgroundManual background EManual backgroundManual background R W O O D Manual backgroundIManual backgroundManual background N D U S T R Manual backgroundIManual backgroundManual background EManual backgroundManual background S LManual backgroundManual backgroundManual backgroundT D

OWNER’S MANUAL

WHAT TO DO IF YOU SMELL GAS

Open windows/extinguish any open flame.

Do not try to light any appliance.

Do not touch any electrical switch or use any phone in your building.

Immediately call your gas supplier from a neighbour’s phone. Follow the gas supplier’s instructions.

If you cannot reach your gas supplier, call the fire department.

FOR YOUR SAFETY

Do not store or use gasoline or other flammable vapours and liquids in the vicinity of this or any other appliance.

WARNING

If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or loss of life. Installation and service must be performed by a qualified installer, service agency or the gas supplier.

This appliance may be installed in an after-market permanently located, manufactured (mobile) home, where not prohibited by local codes.

This appliance is only for use with the type of gas indicated on the rating plate. This appliance is not convertible for use with other gases, unless a certified kit is used.

Massachusetts installations (Warning): This product must be installed by a licensed plumber or gas fitter when installed within the Commonwealth of Massachusetts. Other Massachusetts code requirements: Flexible connector must not be longer than 36in, shut-off valve must be a “T” handle gas cock; only direct vent sealed combustion products are approved for bedrooms/bathrooms; fireplace dampers must be removed or welded in the open position prior to the installation of a fireplace insert or gas log.

50-927

Page 1
Image 1
Enviro 50-927, C-10791 owner manual What To Do If You Smell Gas, For Your Safety, D Ir Ec T V En T Fir Ep La C E