Operating Instructions

PILOT LIGHT:

1.Turn off the gas to the fireplace. If not recently done, remove the glass and let the unit air out for at least five (5) minutes to clear out any gas. Turn on gas to the heater. Leak test all joints with soapy water. NEVER USE OPEN FLAME FOR LEAK TESTING.

2.Start the pilot by pressing the gas control knob and turning it to PILOT.

While holding the gas control knob in, press the piezo ignitor several times

����������

������������

until the pilot light starts. Hold the gas control knob in for 30 seconds.

 

 

Check that the pilot has fully engulfed the thermocouple assembly (see

 

 

Figure 3).

 

 

3. Start the main burner by turning the gas control knob to ON and then

 

 

turn the rocker switch to ON. Check that all burner ports have flame.

 

 

4. Leak test all gas joints again.

Figure 3.

Pilot Flame

AIR SHUTTER:

The air shutter adjustment lever is centered above the controls (see Figure 4).

The air shutter allows the amount of air coming into the fireplace to be adjusted in order to accommodate different climates and venting arrangements. Start the pilot and then the burner. Make sure the pilot flame is burning normally and none of the burner ports are plugged. Let the fireplace burn for roughly fifteen minutes and then examine the flames, compare the flames to Figure 40.

The ideal flame will be blue at the base and light orange above. The flames should be of medium height. If the flames look like this, no venturi adjustment is needed. If the flames are fairly short and mostly

���� ��� � ����

���� ��� � �����

 

blue, the fireplace is getting too much

 

air. Therefore, the air shutter should be

 

closed (push in) slightly until the correct

��� �������

flames are achieved. Flames that are

 

very orange, with tall, dark, stringy tips,

 

are not getting enough air. Open (pull

 

out) the venturi until the flames clean

 

up. If the venturi is opened, or closed all

 

the way, and the correct flames cannot

 

be attained, turn off the gas and contact

 

the dealer.

 

Warning: Incorrect venturi adjustment

 

may lead to improper combustion, which

 

is a safety hazard. Contact the dealer if

 

there is any concern about the venturi

 

adjustment.

Figure 4. Air shutter adjustment lever.

7

Page 6 Page 8
Page 7
Image 7
Enviro 50-927, C-10791 owner manual Blue, the fireplace is getting too much
Page 6 Page 8

50-927, C-10791 specifications

Enviro 50-927, also known as C-10791, represents a breakthrough in environmental technology designed to enhance sustainability and improve ecological balance. It is primarily aimed at industries with significant environmental footprints, such as manufacturing, transportation, and waste management.

At the heart of Enviro 50-927 is its advanced filtration system, which utilizes a multi-layered approach to isolate and neutralize harmful pollutants. The technology incorporates activated carbon, biofilters, and advanced polymer membranes that work synergistically to capture particulate matter, volatile organic compounds, and heavy metals. This comprehensive filtration process not only purifies air and water but also reduces the overall emissions footprint of industrial operations.

Another key feature of Enviro 50-927 is its smart monitoring technology. Equipped with IoT capabilities, it allows for real-time tracking and analytics of environmental parameters, facilitating proactive management of resources. Users can gain insights into the efficiency of operations, detect anomalies, and optimize processes, leading to reduced waste and energy consumption. This cloud-connected system enables seamless integration with existing Enterprise Resource Planning (ERP) systems, providing a holistic view of environmental impacts across operations.

Durability and resilience are significant characteristics of Enviro 50-927. Manufactured using high-grade, corrosion-resistant materials, it is designed to withstand harsh environmental conditions, making it ideal for both indoor and outdoor applications. Additionally, its compact design ensures that it can be installed in various settings without requiring extensive structural modifications.

Moreover, the installation and maintenance of Enviro 50-927 are user-friendly, requiring minimal downtime and expertise. This accessibility facilitates widespread adoption across different sectors, encouraging a shift towards sustainable practices and enhancing corporate social responsibility efforts.

In summary, Enviro 50-927, C-10791 showcases a blend of innovative technologies and user-centric design, setting a new standard for environmental management solutions. Its comprehensive features cater to evolving industry needs, promoting sustainability while maintaining operational efficiency. As companies increasingly prioritize eco-friendliness, products like Enviro 50-927 will be integral in meeting regulatory requirements and achieving sustainability goals.
Top Page Image Contents