Initial Installation
QUALIFIED INSTALLERS ONLY
FRAMING MOUNT BRACKETS:
Mount the two framing mount brackets on each side and secure the fireplace to framing with screws or nails (refer to Figure 16). The brackets will allow for a 1⁄2” (13 mm), 5⁄8” (16 mm), 3⁄4” (19 mm) thick finishing wall. The wall may be finished up to the fireplace facing with combustible material.
Figure 16. Nail Tab.
CORNER INSTALLATION:
The dimensions for installing a fireplace in the corner of a room are given in Figures 17 and 18. Refer to
“INITIAL INSTALLATION - VENT CONFIGURATIONS AND RESTRICTOR SETTINGS” for allowable pipe lengths.
Do not interfere with the structural integrity of the walls.
Figure 17. Dimensions for a corner installation, rear
vented.
RAISED FIREPLACES AND HEARTHS:
Figure 18. Dimensions for a corner installation, top
vented.
Figure 19. Raised Fireplace with Raised Hearth | Figure 20. Raised Fireplace with Floor Level Hearth |
15
