Secondary Installation
4.Upon the first light up, watch for ignition to ALL burner ports. If a long delay is noted: First, wait for the appliance to cool down.
•Open the front door of the appliance.
•Check to carefully reposition the embers making sure that burner ports are not plugged solid or blocked.
Important note: When the unit is turned on for the first time, It should be turned onto high without the fan on for the first 4 hours. This will cure the paint, logs, gasket material and the other products used in the manufacturing process. It is advisable to open a window or door, as the unit will start to smoke and can irritate some people. After the unit has gone through the first burn turn the unit off including the pilot, let the unit get cold then remove the glass door and clean it with a good gas fireplace glass cleaner, available at your local ENVIRO dealer.
See Routine Maintenance And Service on how to remove door to clean glass.
Figure 14: Step 4 of Log Placement.
Figure 15: Log Placement with Embers.
Figure 16: Appliance Burning.
CAUTION: NEVER OPERATE THIS APPLIANCE WITH THE GLASS DOOR REMOVED.
14
