Envision Peripherals EN9410e Setting the Display Resolution, Choosing The Best Resolution

6 Setting the Display Resolution

Choosing The Best Resolution

All Liquid Crystal Displays (LCDs) have a fixed resolution that is the the maximum resolution that may be displayed on the LCD. In the case o EN9410e the LCD resolution is 1280 x 1024 pixels. This is also known as ￿native￿ resolution of the monitor. Lower resolutions can be displayed screen through an interpolation circuit. Because the lower resolution expanded, the quality of the displayed image is not as good as that av when the native resolution is displayed. For optimal performance from a monitor, you must use the monitor￿s native resolution.

If you are using Windows 95, 98, 2000, Me, XP or NT 4.0, you can change resolution as follows:

1.Double-click Displaythe icon in the control panel.

2.From theDisplay Propertiesdialogue box, selectSettingsthe tab.

There is a slider on the right-hand side in the middle of the dial that alters the displayed resolution. Set the resolution to 1280 x

3.For Windows NT users only:select a refresh rate of either 60Hz or 75 and clickTest. A test pattern will be displayed. Make sure that ther no error messages shown by the monitor. If an error message is displayed, check the resolution and refresh rate settings or choos different refresh rate.

4.ClickOK to closeDisplay Properties.

6