7 Adjusting the Monitor
Picture Optimisation
The easiest way to obtain an optimal picture isAutoby usingbuttonthefor 2 seconds. This only works reliably if the graphics adaptor is set to use monitors factory modes Tabl(see 1in the previous chapter) and if you are displaying a suitable stationary image (such as the windows desktop).
The monitor will remember the settings obtained by the auto calib settings and use them whenever you turn the monitor on. Note that you need to readjust the monitor if it is connected to a different comput computers graphics adaptor is replaced.
If you are still not satisfied with the result, you can enhance the ima the monitors manual adjustment functions.
OSD Adjustment
Adjustments to the displayed image are made using the
9
