8 Frequently Asked Questions
The image is blurred, how can I get the best quality picture?
Read chapter 6,Setting the Display Resolution, and select a graphics signal with the correct resolution and refresh rate. Then read ch Adjusting the Monitor, and make adjustments to the displayed image based on these instructions.
Have you used a VGA extension cable?
If so, remove the extension cable and check the displayed image. Ha image quality improved? Optimise the image using the procedures chapter 7 with the extension cable removed. Reconnect the extens cable once the image has been optimised. Depending on the characteristics and type of the extension cable, some blurring or d may occur due to conduction losses of the extension cable. You minimise these losses by using an extension cable with better condu quality or with a
Does the blurring only occur at resolutions lower than the (maximum) resolution?
Please read chapterSetting6, the Display Resolution.Select a graphics signal that uses the monitors the native resolution (1280 x 1024 p
Why does the image look yellow, blue or pink instead of showing the correct colours?
The most common cause of this problem is a loose VGA signal cable connector. Check that the cable is securely connected to the comput
Check the VGA signal cable for damage. If any pins are bent or brok contact your dealer or an authorized Envision Peripherals Inc. s agent
13