Envision Peripherals L42H761 user manual Before Calling Service, Remote control If necessary

Models: L42H761

1 37
Download 37 pages 54.06 Kb
Page 35
Image 35

English

BEFORE CALLING SERVICE

Please make these simple checks before calling service.These tips may save you time and money since charges for receiver installation and adjustments of customer controls are not covered under your warranty.

Symptoms

Items to Check and Actions to follow

 

 

“Ghost ” or double image

*This may be caused by obstruction to the antenna

 

due to high rise buildings or hills. Using a highly

 

directional antenna may inprove the picture.

 

 

No power

*Check that the TV’s AC power cord is plugged into

 

the mains socket.

 

*Unplug the TV, wait for 60 seconds.Then re-insert

 

plug into the mains socket and turn on the TV

 

again.

No picture

*Check antenna connections at the rear of the TV

 

to see if it is properly connected to the TV.

 

*Possible broadcast station trouble.Try another

 

channel.

 

*Adjust the contrast and brightness settings.

 

*Check the Closed Captions control. Some TEXT

 

modes could block the screen,

Good picture but no sound

*Increase the VOLUME.

 

*Check that the TV is not muted; press the MUTE

 

button on the remote control.

 

 

Good sound but poor color

*Adjust the contrast, color and brightness settings.

 

 

Poor picture

*Sometimes, poor picture quality occurs when

 

having activated an S-VHS camera or camcorder

 

connected and having connected another

 

peripheral at the same time. In this case switch off

 

one of the other peripherals

Snowy picture and noise

*Check the antenna connection

 

 

Horizontal dotted line

*This may be caused by electrical interference (e.g.

 

hairdryer, nearby neon lights, etc.)

 

*Turn off the equipment.

 

 

Television not responding to

*Check whether the batteries are working. Replace

remote control

if necessary

 

*Clean the remote control sensor lens on the TV.

 

*You can still use the buttons at the front of your TV.

 

*Select the TV mode to be sure your remote

 

control is in the TV mode.

 

 

33

Page 35
Image 35
Envision Peripherals L42H761 user manual Before Calling Service, Remote control If necessary