Epson 1200U Unlock the Scanner, starts flashing red, turn the scanner off and try again

Unlock the Scanner

Before connecting the scanner to a power source, you must release the transportation lock, located on the side of the scanner.

Turn the transportation lock down to the unlocked position using a coin or similar object, as shown.

If you can’t turn the transportation lock easily, turn the scanner on (see page 12 for instructions); then, after the operate light

starts flashing red, turn the scanner off and try again.

Always lock the scanner carriage before transporting it; otherwise, the scanner may be damaged. Be sure the scanner lamp is in the home position (toward the back of the scanner). To ensure this, always turn off the scanner before locking the carriage.

home position

operate light

11