Selecting Settings

Be sure to select Auto Document Feeder (ADF) in the Document Source setting in EPSON TWAIN. For more information on selecting driver settings, see the EPSON TWAIN User’s Guide.

Loading Documents ManuallyYou can load documents manually even when the ADF is installed.

Lift the ADF and place the document on the document table. Then lower the ADF and scan the document.

Always close the ADF and its cover before scanning. If you are scanning thick material or documents more than 1.6 inches (4 cm) thick, leave the ADF in the upright position. Be sure to cover any exposed areas of the document table glass.

Be sure to select Flatbed in the Document Source settings in EPSON TWAIN.

Opening the auto document feeder or its cover while it is operating results in an option error and stops paper feeding.

When scanning thin documents, you may see an impression of the underside of the auto document feeder in your scans. If so, remove the auto document feeder and re-install the document cover as described on page 54.

69