1-4 Installing and Setting up the Software
LProof Sign-off:
K. Pipa _______
M. Fujimori _______
R. Thomson _______
R4C5700
Rev. C
A5 size INSTALL.FM
4/6/01 Pass 0
Connecting to a PC
You can connect the camera to a PC using a Windows
serial cable. Follow the steps below.
1. Make sure the camera and your computer are
turned off.
2. Plug the serial connector end of the cable into the
serial port on your computer. Then tighten the
screws.
Note:
If you have more than one port available, use the port
labelled COM1 or a similarly labelled port.
3. Open the connector cover on the side of the
camera. Insert the free end of the serial cable into
the interface connector. Make sure that the shape
of the cable connector corresponds to the shape of
the interface connector.
Windows
serial cable
serial port on computer
connector cover
PhotoPC 800
PhotoPC 3000Z
connector cover