Epson 505C Not Supported, The message Not Supported is displayed

If you’re using a PC laptop:

■Hold down the Fn key and press the function key that lets you display on an external monitor. It may have an icon such as

, or it may be labelled CRT/LCD. Allow a few seconds for the projector to sync up after pressing it. Check your laptop’s

manual or online help for details.

On most systems, the key lets you toggle between the LCD screen and the projector, or display on both at the same time.

■Depending on your computer’s video card, you might need to use the Display utility in the Control Panel to make sure that both the LCD screen and external monitor port are enabled. See your computer’s documentation or online help for details.

If you’re using a PowerBook:

1.From the Apple menu, select Control Panels, then click

Monitors and Sound.

2.Click the Arrange icon.

3.Drag one monitor icon on top of the other. This lets you display on the projector screen as well as the LCD screen.

4.If this option isn’t available, click the Monitor icon.

5.Select one of the listed Simulscan resolutions. (Allow a few seconds for the projector to sync up after making the selection.)

The message Not Supported is displayed.

Make sure your computer’s resolution doesn’t exceed UXGA

(1600 ⋅ 1200, for the PowerLite 715c) or SXGA (1280 ⋅ 1024, for the PowerLite 505c), and the frequency is supported by the projector (see page 124). If necessary, change your computer’s resolution setting as described on page 96.

Solving Problems 95