Creating Your Own Startup Screen
You can transfer any image on your computer to the projector, and then use it as the screen displayed when the projector is not receiving a signal. You can also set it to be displayed when you press the
A/V Mute button, or as a startup screen. The image can be a company logo, slogan, photograph, or any other image you want to use.
You can also use the Capture menu to capture and save images on the memory card. See page 65 for instructions.
Capturing the ImageStart by displaying the image you want to use on the projector. You can use an image from either a computer or video source such as a VCR or digital camera. Then follow these steps to capture the image and transfer it to the projector:
1.Press the Menu button on the remote control. You see the main menu.
2.Use the Enter button to highlight the Capture menu.
Video | Image Capture | Execute |
Audio | User's Logo Capture | Execute |
Effect |
|
|
Setting |
|
|
Capture |
|
|
Advanced |
|
|
About |
|
|
Reset All |
|
|
:Select 
:Enter
3.Use the Enter button to highlight User’s Logo Capture and press Enter again to select it. You see the message shown at the right.
4.Select Yes and press Enter. A selection box displays over the image.