Focusing and Zooming Your Image

Rotate the focus ring to sharpen the image.

lens ring tab

focus ring

Use the tab to rotate the lens ring and reduce or enlarge the image.

You can also change the image size by moving the projector closer to or farther away from the screen. You can use the E-Zoombutton on the remote control to zoom in on a portion of the image. See page 33 for instructions.

Adjusting the Height of Your Image

If the image is too low, you can raise it by extending the projector’s feet.

1.Stand behind the projector. Pull up the blue foot release levers and lift the front of the projector. This unlocks the feet.

2.Once the image is positioned where you want it, release the levers to lock the feet in position.

3.To fine-tune the height of the image, rotate the thumb wheels attached to the projector’s feet.

If the image is no longer square after raising it, see the next section.

caution

Do not hold the projector by the lens; this can damage it.

Using the Projector 25