If it doesn’t fit, you may have to use a Macintosh desktop adapter, which you can buy from EPSON (see page 8).
To use the adapter, remove its cover as shown and set its DIP switches according to the resolution you want to use, such as
Replace the cover and connect the adapter to the free end of the computer video cable. Then plug the cable (with the adapter) into the video port on your Macintosh.
4. Tighten the screws on the connectors.
Connecting the Mouse Cable
To use the remote control as a mouse, follow the steps below.
If the Macintosh has a USB port, you can use the USB mouse cable that came with the projector. If it has a round mouse port, you’ll need a Macintosh ADB mouse cable. See your projector dealer for help in obtaining the correct cable.
1. Connect one end of the mouse cable to the projector’s USB port.
2.Disconnect your Macintosh’s mouse cable. Connect the other end of the projector’s mouse cable to a USB port on your Macintosh.
112Appendix A: Connecting to Additional Equipment