Connecting to a Desktop Macintosh

You can connect the projector to any desktop Macintosh. This section includes instructions for the following:

Connecting the computer video cable

Connecting the mouse cable (if you want to use your remote control as a mouse)

Connecting an optional audio cable (if you’ll be projecting with audio)

When you connect the projector to a desktop Macintosh, you cannot view your display on the Macintosh monitor.

Follow the steps in each section for the cables you need to connect. Before beginning, turn off the projector and computer if they are on.

Connecting the Computer Cable

Follow these steps to connect the computer cable. You may not need to use the adapter as shown.

1.Disconnect the monitor cable from the video port on the back of the Macintosh.

2.Connect one end of the computer cable to the projector’s Computer port, as shown.

note

Macintosh configurations vary. See your computer manual for the location of the ports needed to connect your projector. Older models may require a Macintosh adapter, which you may purchase from EPSON; see page 8.

Macintosh adapter (if needed)

3.Connect the other end of the computer cable to the video port on the Macintosh.

Appendix A: Connecting to Additional Equipment 111