note

To connect to desktops and other computer systems, see Appendix A. If you have an iBook with an RCA video- out port, follow the instructions for connecting to a video device on page 16.

note

Laptop configurations vary. See your computer manual for the location of the ports needed to connect your projector.

Connecting to a Laptop Computer

You can connect the PowerLite projector to any computer that has a standard video output (monitor) port, including PC notebook and laptop computers, Macintosh PowerBooks and iBooks, and hand-held devices.

Connecting the Computer Cable

Before you start, make sure your computer and the projector are turned off.

1.Connect one end of the computer cable to the projector’s

Computer/Component Video port.

2.Connect the other end of the computer cable to your laptop’s video-out or monitor port.

If you’re using a PowerBook or iBook and you can’t connect the cable, you may need to use the Macintosh desktop adapter as shown on page 82 (available from EPSON; see page 7).

3.Tighten the screws on the connectors.

If you don’t need to make any other connections, you can plug in your projector and turn it on. See page 20 for instructions.

12Setting Up the Projector