4.Use the screwdriver included with the replacement lamp to slide the edge of the lamp cover towards the side of the projector. Then
lift off the cover.
)
1
2
5.Use the screwdriver to loosen the two screws holding the lamp in place. The screws are deep inside the projector on the sides of the lamp. (You can’t remove the screws.)
Don’t remove these screws
6.Hold the lamp by the top, as shown, and pull the lamp straight out.
warning
This product includes a lamp component that contains mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put it in the trash.
56Maintaining and Transporting the Projector