note
If you have repositioned the image, you can use the Auto button on the remote control to restore the default settings.
Adjusting the Image
The Video menu lets you make adjustments to the projected image. The options available in the menu depend on which image source is selected: computer or video.
Repositioning the Image
Follow these steps to
1.Press the Menu button. You see the main menu.
2.Press Enter to select the Video menu.
3.Press Enter to select the Position option. You see the Position adjustment screen.
4.Use the directional buttons to move the image left, right, up, or down.
5.When the image is positioned the way you want, press Esc.
Adjusting Image Appearance
Follow these steps to adjust the appearance of your image:
1.Press the Menu button. You see the main menu.
2.Press Enter to select the Video menu.
3.Use the directional buttons to set the following options:
■Tracking (computer images only)
Removes unwanted vertical lines from a computer image by matching the projector’s internal clock to various computer signals.
■Sync (computer images only)
Corrects fuzziness or screen flicker by synchronizing the projector with the tracking signal sent from the computer.
■Auto Setup (computer images only)
Leave this setting ON to automatically optimize the computer image. Turn it off if you want to save adjustments you have made to the video settings.
40