9.After the scanner software installation is complete, the Screen Calibration utility automatically starts. For the best results from an EPSON ink jet printer, leave the default setting of 1.8.
If you are using a different printer or your printouts don’t match what you see on screen, you can change the setting. Move the slider to the right or left until the shades of the horizontal gray stripes appear similar. View the screen from a short distance. The gray stripes will not perfectly blend together; however, try to make the two tones match as closely as possible.
10.Click OK to register the calibration setting.
You will not need to change the screen calibration again as long as you continue to use the same monitor.
If you don’t see the Screen Calibration utility, you can access the utility as follows:
11.Click Finish to exit the Add New Hardware Wizard.
12. Now you can install the rest of your scanner software as described on page 20.
Setting Up Your Scanner 11