6.When you return to the Add New Hardware Wizard, click Next.
7.Windows finds the driver for your scanner and you see this screen:
Click Next.
8.After the scanner software installation is complete, the Screen Calibration utility automatically starts. For the best results from an EPSON ink jet printer, leave the default setting of 1.8.
If you are using a different printer or your printouts don’t match what you see on screen, you can change the setting. Move the slider to the right or left until the shades of the horizontal gray stripes appear similar. View the screen from a short distance. The gray stripes will not perfectly blend together; however, try to make the two tones match as closely as possible.
9.Click OK to register the calibration setting.
Setting Up Your Scanner 13