■Do not place the projector where the cord can be walked on. This may result in fraying or damage to the plug.
■Unplug the projector from the wall outlet before cleaning. Use a damp cloth for cleaning. Do not use liquid or aerosol cleaners.
■Do not block the slots and openings in the projector case. They provide ventilation and prevent the projector from overheating. Do not operate the projector on a sofa, rug, or other soft surface, or in a
■Never push objects of any kind through cabinet slots. Never spill liquid of any kind into the projector.
■Except as specifically explained in this User’s Guide, do not attempt to service this product yourself. Refer all servicing to qualified service personnel. Opening or removing covers may expose you to dangerous voltages and other hazards.
■Unplug the projector during lightning storms or when it will not be used for extended periods.
■Do not place the projector and remote control on top of
■Unplug the projector from the wall outlet and refer servicing to qualified service personnel under the following conditions: When the power cord or plug is damaged or frayed. If liquid has been spilled into the projector, or if it has been exposed to rain or water. If it does not operate normally when you follow the operating instructions, or if it exhibits a distinct change in performance, indicating a need for service. If it has been dropped or the housing has been damaged.
■If you use the projector in a country other than where you purchased it, use the correct power cord for that country.
■Do not stand on the projector or place heavy objects on it.
■Do not attempt to remove the lamp immediately after use. Allow the lamp to cool for approximately one hour before removing it.
■Do not use the projector outside of the required temperature range (41 to 95 °F). Doing so may cause an unstable display and an excessive load on the fan, leading to projector damage.
116Appendix B: Notices