Installing EasyMP

You must install the software to use the EasyMP features. Before you install EasyMP, make sure the computer you use meets the requirements listed below:

System Requirements

■IBM® compatible with at least a Pentium® 166 MHz processor (Pentium II 300 MHz or higher recommended)

■Microsoft® Windows 95/98/Me, Windows NT 4.0, or Windows 2000 (USB feature not available with Windows 95 or Windows NT 4.0)

■At least 32MB of RAM (96MB or more recommended)

■At least 12MB of free hard disk space

■VGA (640 ⋅ 480) or better display adapter and monitor

Installing the Software

Locate the EasyMP Software CD-ROM that came with your projector and follow these steps to install the software.

1.Insert the EasyMP Software CD-ROM in your drive. The setup program starts automatically.

If it doesn’t start automatically, double-click My Computer, double-click the EasyMP icon, then double-click setup.exe.

2.Select your language and click OK.

3.Follow the instructions on the screen to accept the license agreement and install the software.

4.When you see the Setup Complete message, click Yes to restart your computer, then click Finish.

Once EasyMP is installed, you see the EMP SlideMaker icon on your desktop.

Creating Presentations for Your Projector 43