note
If you access the About menu when the projector display is set to video, you only see the lamp life and the video signal setting.
You see the lamp usage hours and computer display settings on the right:
Video | Lamp ON Time | : | 9999 H |
Audio | Video Source | : | Computer |
Effect | Input Signal | : | RGB |
Setting | Frequency | : H 999. 99 KHz | |
Capture |
| : V 999. 99 Hz | |
Advanced | SYNC Polarity | : | H Positive |
About |
| : | V Negative |
Reset All | SYNC Mode | : | Sync On Green |
| Resolution | : | 9999x9999 |
| Refresh Rate | : | 999. 9 Hz |
:Select
The life span of the lamp is about 1000 hours. If the number shown is close to 1000, make sure you have a spare lamp handy.
3. When you’re finished, press Esc or Menu.
Restoring the Default Settings
The Reset All option lets you return all the projector settings to their default values.
Video |
|
Audio |
|
Effect |
|
Setting |
|
Capture |
|
Advanced |
|
About |
|
Reset All | Execute |
:Select 
:Execute
Select Reset All and press the Enter button on the remote control to display the confirmation screen. Select Yes to reset all the default settings or No to cancel.
82