4.Squeeze the lens cap tabs and remove the lens cap.
Squeeze here
5. Press the red Power button on top of the projector.
Power button
caution
Do not use the projector with the lens cap in place. The heat generated by the lens can damage the cap.
power light
The power light flashes green as the projector warms up, and the projection lamp comes on in about 30 seconds. The power light stays green.
You may see the EasyMP main screen or a presentation that has been saved on the memory card and set to run automatically.
warning
Never look into the lens when the lamp is on. This can damage your eyes, and is especially dangerous for children.
Using the Projector 21