Controll Panell Messages
For a complete list of status messages, see your Printer Guide.
Status message list
|
|
Messages | Description |
|
|
Form Feed | The printer is feeding paper. |
|
|
Ready | The printer is ready to print. |
|
|
Reset | The printer’s current interface has been reset and the buffer is cleared. |
|
|
Reset All | All printer settings have been reset to the user default configuration, the last settings that |
| were saved. |
|
|
Reset to Save | You should reset the printer to save the current settings. |
|
|
Self Test | The printer is running a |
|
|
Standby Level X | The printer is turned on, but is in |
(X = 1 or 2) |
|
|
|
Warming Up | The printer is warming up. |
|
|
For a complete list of error messages, see your Printer Guide.
Error message list
Messages | Description | Action |
|
|
|
|
|
Check Paper Size | The paper size setting is different from | Make sure the correct size of paper is loaded | |
| the size loaded in the printer. | in the tray; then press the Continue button. | |
|
|
|
|
Irregular Density | The document density is too great. | Clear any jammed paper from the multipurpose | |
| The printer stops loading paper. | tray paper path. | |
|
|
|
|
Image Optimum | There printer doesn’t have enough | If the printout is not acceptable, try limiting | |
| memory to print the page at the | the number or size of graphics on the page. | |
| specified resolution. The printer |
|
|
| automatically reduces the print quality | Turn off the Image Optimum setting in the | |
| so it can continue. | SelecType Config menu. | |
|
|
|
|
Maintenance Req | An internal printer part needs | Press the Continue button to print. Make sure you | |
<error number> | to be replaced. | note the error number and contact your dealer. | |
|
|
|
|
Continue
▲
9