Replacingl i the Fuser Oilil Rollll

Fuser Oil Roll

S052002

 

 

fuser unit

face-up tray

1Lower the face-up tray, if necessary. Then pull the fuser unit all the way out.

Be careful not to touch the fuser—marked CAUTION! HIGH TEMPERATURE—or the adjoining areas. If you’ve used the printer recently, the fuser and the area around it can be very hot.

2Grab the handle of the fuser oil roll and remove it.

fuser oil roll

Do not dispose of the used oil roll in fire; it can explode and cause injury.

3Take a new fuser oil roll (S052002) out of its box and remove the cover and shipping pins, as shown.

4Hold the roll handle and insert it into the fuser unit, matching the green marks on the roll and unit.

handle

positioning marks

5Push the roll down firmly until it clicks into place.

6Slide the fuser unit back into the printer.

4