Error message list (continued)
Messages | Description | Action |
|
|
|
|
|
Mem Overflow | The printer doesn’t have enough | Press the Continue button on the control panel. | |
| memory available for the current | If the message remains, reset the printer by | |
| print job. | holding down the Alt and Reset buttons. | |
|
| If the same message appears when you try | |
|
| printing again, you may need to reduce the | |
|
| number or size of graphics or fonts, lower the | |
|
| resolution, or add memory to your printer. | |
|
|
|
|
Replace Oil Roll | The fuser oil roll is empty. | Replace the fuser oil roll (see page 4). | |
|
|
|
|
Replace Photocondctr | The photoconductor unit has reached | Replace the photoconductor unit (see page 2). | |
| the end of its service life. |
|
|
|
|
|
|
Replace Waste T Box | The waste toner collector is full. | Replace the waste toner collector (see page 3). | |
|
|
|
|
Error message list (continued)
Messages | Description | Action |
|
|
|
|
|
<CMYK> Toner Out | The indicated toner cartridge is empty. | Replace the indicated toner cartridge (see page 1). | |
|
|
|
|
Service req e | A controller error or a print engine | Write down the error number and turn off the | |
<error number> | error has been detected. | printer. Wait at least 10 seconds and then turn it | |
|
| back on. If this error still appears, turn off the | |
|
| printer, unplug the power cord, and contact | |
|
| your dealer. | |
|
|
|
|
10