Troubleshooting 66

Problem with Quick Wireless Connection USB Key (When

using the optional Quick Wireless Connection USB Key)

Problems concerning monitoring and control

Mail is not sent even if a problem occurs in the projector.

Have you changed the projector settings after you stored
the projector information in the USB Key?
Store the projector information again in the USB Key.
Then connect the USB Key to the computer.
Check Remedy
Check Remedy
While projector information was being stored in the USB
Key, was there any message, saving or finished, displayed
on the screen?
If any message was not displayed, the stored information in the USB key may have been erased.
Contact Epson. See your User’s Guide for more information.
Check Remedy
Is the Wireless LAN unit connected?
For Wireless LAN
Check that the optional Wireless LAN unit is securely connect ed.
Is the network connect setting correct? Check the projector's network settings. See your User’s Guide for more information.
Is Standby Mode set to Communication On? To use the Mail Notification function when the projector is in standb y, set Communication On in
Standby Mode from the configuration menu. See your User’s Guide for more information.
Did a fatal abnormality occur and the projector come to a
sudden stop?
When the projector comes to a sudden stop, mail cannot be sent.
If, after checking the projector, the abnormal state continues, contact Epson. See your User’s Guide for
more information.
Is power being supplied to the projector? Check that your electrical outlet or power source is functioning cor rectly.