Zooming Your Image

Follow these steps to zoom in on a portion of the image:

1.Press the E-Zoom + button on the remote control.

You see a crosshair indicating the center of the zoom-in area.

2.Use the four “arrow” buttons on the remote control to position the crosshair in the area you want to enlarge.

3.Continue pressing the E-Zoom + button to enlarge the selected area up to 4 times.

4.While the image is enlarged, you can:

■Use the arrow buttons to pan about.

■Press the E-Zoom – button to zoom out.

Arrow buttons

E-Zoom buttons

5.When you’re done, press the ESC button to return to the original size.

Changing the Image’s Aspect Ratio

If you’re projecting a widescreen format image, you can use the Aspect button on the remote control to change the aspect (width to height) ratio from 4:3.

You can change video images to 16:9 (widescreen format), or 16:9 (Up) or 16:9 (Down) (to accommodate subtitles or supertitles).

You can change computer images to 16:9 (widescreen format) or

Normal

Press the Aspect button again to cycle through the available options.

You can also change the aspect ratio using the projector’s Signal menu. See page 54 for details.

Aspect button

Using the Remote Control 47