Only part of the computer image is displayed.

■If you’re projecting from a computer or RGB video device, press the Enter/Auto button on the remote control. If this doesn’t work, you may need to adjust the Position setting in the Signal menu. See page 55 for more information.

■If you’ve enlarged part of the image using the E-Zoombutton on the remote control, press the Esc button to cancel zooming and return to full display.

■Try pressing the Aspect button on the remote control to select a different aspect ratio (4:3, 16:9, or another available setting).

■Make sure your computer’s resolution setting is correct and dual display is not activated. Ideally, it should be 1024 × 768 to match the projector’s native resolution. If this option isn’t available, select another compatible video format. See page 105.

■Windows:

Right-click the desktop, select Properties, click the Settings tab, and select a different resolution.

■Macintosh OS X:

On the Apple menu, choose System Preferences, then click Display or Displays. Select a different resolution.

■You also may need to modify existing presentation files if you created them for a different resolution. See your software documentation for specific information.

The image isn’t rectangular, but trapezoid-shaped.

■Make sure the projector isn’t placed off to one side of the screen, at an angle, or the image won’t be rectangular. Place it directly in front of the center of the screen, facing the screen squarely.

■If you’ve tilted the projector upward, the image will be broader at

the top. Turn on Auto Keystone as described on page 56 or hold

down the or buttons on top of the projector until the image is rectangular.

82Solving Problems