Power | Lamp | Temperature |
|
light | light | light | Description |
|
|
|
|
Green | Off | Off | The projector is operating normally. |
|
|
|
|
Flashing | Off | Off | The projector is warming up. Wait for the image to appear. |
green |
|
|
|
|
|
|
|
Orange | Off | Off | The projector is in standby or sleep mode. You can unplug |
|
|
| it or press the P Power button to turn it on. |
|
|
|
|
Flashing | Off | Off | The projector is shutting down. Wait for the light to stop |
orange |
|
| flashing and remain orange before unplugging it. |
|
|
|
|
Red | Off | Flashing | The projector is too hot. Make sure the temperature |
|
| orange | surrounding the projector does not exceed 95 °F (35 °C) |
|
|
| and there is plenty of space around and under the projector |
|
|
| for ventilation. Clean the air filter and air vents, if |
|
|
| necessary. See page 70 for instructions. |
|
|
|
|
Red | Off | Red | The projector has overheated and turned itself off. Let it |
|
|
| cool for about five minutes, then turn it back on. Make sure |
|
|
| there is plenty of space around and under the projector for |
|
|
| ventilation. If you are using the projector at an altitude |
|
|
| above 4921 ft (1500 m), turn on High Altitude Mode as the |
|
|
| Operation setting in the Extended menu; see page 58. Also |
|
|
| clean the air filter and air exhaust vents. See page 70. If it |
|
|
| continues to overheat, you may need to replace the air |
|
|
| filter. |
|
|
|
|
Red | Flashing | Off | The lamp is burned out, broken, or not installed correctly; |
| red |
| or the lamp cover is open. Close the cover or replace or |
|
|
| reseat the lamp, if necessary, as described on page 72. If |
|
|
| these suggestions don’t work, contact Epson. |
|
|
|
|
Orange | Flashing | Off | Replace the lamp with a new one as soon as possible; see |
| orange |
| page 72 for instructions. If you continue to use the lamp, |
|
|
| there is a risk it may break. |
|
|
|
|
Red | Off | Flashing red | There is a problem with the fan or a sensor. Turn the |
|
|
| projector off and unplug it. Contact Epson for help. See |
|
|
| |
|
|
|
|
Red | Red | Red | There is an internal error in the projector. Turn the projector |
|
|
| off and unplug it. Contact Epson for help. See page 87. |
|
|
|
|
Solving Problems 79