Resetting the Lamp Timer
You must reset the lamp timer after replacing the lamp to clear the Replace the Lamp warning message. Follow these steps:
1.Connect the power cable and turn on the projector.
2.Press the Menu button on the remote control or projector and select the Reset menu. Then press Enter.
3.Select Reset Lamp Hours and press Enter. You see a confirmation screen.
4.Select Yes and press Enter.
5.Press Esc to return to the main menu or the Menu button to exit the menu system.
note
Do not reset the lamp timer if you have not replaced the lamp. If you do, the Lamp Hours will not accurately reflect the number of hours that the lamp has been used.
Maintenance and Transportation 75