53
2. Specify the photo number and the number of copies that you
want to print, when One or Set is selected for the Print Mode
setting.
3. Press and hold the Brightness button for three seconds. The
Filter icon flashes on the Copies menu.
4. If you selected All or Set for the Print Mode setting, select the
number of the photo on which you want to apply a filter.
5. Select the number of the filter you want to use. The table below
lists the filter numbers and their effects. Also refer to the color
pages at the end of this guide for the examples of filter effects.
Note:
If you select All or Set for the Print Mode setting and want to use
a filter effect on all of the selected photographs, press and hold the
Brightness button for 3 seconds. ALL appears on the Select Photo
menu and the Filter icon stops flashing. The filter is applied to all
photographs. To clear the filter setting, press the Cancel button.
6. Press the Brightness button to select the filter effect. The Filter
icon stops flashing.
No. Effect No. Effect
0Off 5Brighter
1 Monochrome 6 Slightly darker
2Sepia 7Darker
3 High contrast 8 Vivid
4 Slightly brighter 9 Sharp