75
Vertical misalignment or banding
Try one or more of these solutions:
❏Make sure that the printable side of the pa per is face up in the
sheet feeder.
❏Run the Head Cleaning utility to clear any clogged ink
nozzles. See “Cleaning the Print Head” on page 65.
❏Make sure that the Media Type setting selected in the Control
Panel is appropriate for the type of media loaded in the
printer.
❏Make sure that the position of the adjust lever is appropriate
for the media type. When printing on media of norm al
thickness, set the adjust lever to the “0” position. When
printing on envelopes or thick media, set the position to “+”.
Color gaps
Try one or more of these solutions:
❏Make sure that your paper is not da maged, dirty, or too old.
Also, make sure that the printable side of the pap er is face up
in the sheet feeder.
❏Run the Head Cleaning utility to clear any clogged ink
nozzles. See “Cleaning the Print Head” on page 65.
❏Check the berror light. If the light is flashing, replace the
appropriate ink cartridge. See “Replacing an Ink Cartridge”
on page 58.
❏Make sure that the Media Type setting selected in the Control
Panel is appropriate for the type of media that is loaded in the
printer.