81
❏The left edge guide is adjusted to fit your paper.
❏The printer is on a flat, stable surface that extends beyond the
printer base in all directions. The printer will no t operate
properly if it is tilted.

Paper improperly loaded

If you have loaded the paper too far into the printer, the printer
cannot feed the paper correctly. Turn the printer off and gently
remove the paper. Then turn the printer on and reload the pape r
properly.

Paper is not ejected fully or is wrinkled

Try one or more of these solutions:
❏If the paper does not eject fully, press the bmaintenance
button, then open the printer cover and rem ove the paper.
Also, check the Paper Size setting in the Control Panel.
❏If the paper is wrinkled when it comes out, it may be damp
or too thin. Load a new stack.
Note:
Store any unused paper in its original packaging in a dry area. See
“Paper” on page 95 for specifications
Printer Does Not Print
If the printer does not print, check and see if one of the following
error indications is displayed, then try the solutions listed.
❏All lights are off