79
Paper does not feed
Remove the stack of paper and make sure of the following:
❏The paper is not curled or creased.
❏The paper is not too old. See the instructions that came with
the paper for more information.
❏The paper is not loaded higher than the arrow on the left edge
guide.
❏Paper is not jammed inside the printer. If it is, remove the
jammed paper.
❏The black and/or color ink cartridges are not empty. If one is,
replace the appropriate cartridge. To determine which
cartridge is empty, see “Replacing an Ink Cartridge” on page
58.
Load the paper again. Make sure that you follow any special
loading instructions that came with your paper. Also see
“Available Media Types” on page 19.
Multiple pages feed
❏For the users directly printing from PC card, do not select A4
or 100 ×150 mm sheet paper for the Paper Size setting when
roll paper is loaded in the sheet feeder. Doing so causes
unnecessary paper to be fed after each print job. If you h ave
already started printing, press the Cancel button. Wait until
the printer stops printing and feeding paper. Cut off the paper
at the back of the printer, then turn off the prin ter. The
remaining paper is ejected.
❏Make sure that the paper stack fits under the arrow mark
located on the inside surface on the left edge guide.