69
Transporting the Printer
If you need to transport your printer, ca refully prepare and r epack
it as described below using the original box (or a similar box that
the printer fits snugly into) and packing materia ls. Follow the
steps below.
1. Open the printer cover and make sure that the pr int head is
in the home (far right) position. If not, plug in the printer, wait
until the print head returns to the home posi tion, then close
the printer cover and unplug the printer.
cCaution:
Leave the ink cartridges installed when you transport the
printer. Transporting the printer without cartridges in place
can damage the printer.
2. Disconnect the interface cable from the printer.
3. Remove the paper from the sheet feeder and remove the paper
support.
4. Open the printer cover again. Secure the ink cartridge holder
to the printer with the protective material and tape as shown
below, then close the printer cover.
5. Raise the output tray.
6. Attach the protective materials to both sides of the printer.