5.Carefully slide the module connector straight into the socket, as shown below. The connector pins and socket are designed so they fit together only if you have aligned them correctly; so do not force them. If you have trouble, remove the module and try again.
6. Replace the access cover as described on page
After you reassemble your computer, you need to run the SETUP program to make sure it recognizes the new amount of memory. As soon as you turn on the computer, it will prompt you to run SETUP because of the memory mismatch. See Chapter 2 for instructions.
If you later remove or change the memory module, be sure to run the SETUP program again.
Connecting Optional Devices