11.At the installation menu, select Save changes.
12.At the prompt, enter a name that identifies this driver; it’s a good idea to include the driver’s resolution, 100 x 60. The default driver name assigned by the program is 123.SET.
13.Exit the Lotus Install program.
To start Lotus with the new driver resolution, you include the name of the driver when you load the program. For example, if you named your driver 100X60.SET, you would type the following and press 
123 100X60
Microsoft Windows, Version 3.0
The Microsoft Windows driver supports a resolution of 800 x 600 with 16 colors.
Note
Even though this driver specific to Windows 3.0, you can
use it with Windows version 3.1. Check with the Epson Connection for the availability the Windows 3.1 driver.
