Epson BT-200 Charging01 Head a, Connect the headset and the controller, Plug in the AC adapter

Getting Ready

01_Chapter title

Charging01 Head A

The02__productlead is not fully charged at the time of purchase. Charge before use.

This section explains how to charge using the AC adapter. Initial charging takes approximately 5 hours.

1Connect the headset and the controller.

Insert the headset's connection cable into the controller's headset connection port until it clicks.

2Connect the controller and AC adapter.

Connect the controller and the AC adapter with the USB cable.

3Plug in the AC adapter.

The LED indicator flashes light-blue.

Charging is complete when the LED indicator stops flashing and changes to solid light-blue. Disconnect the AC adapter and the USB cable.

Battery life is approximately six hours. Battery life may vary depending on the applications running and environmental usage

12conditions.