1.Hold down the SelecType button for several seconds until the display shows SelecType LEVEL2.
2.Press the A or v button until the “MODE ASSIGN” menu appears.
3.Press the b button to enter the option; the CH submenu (for
example, $ CHP LQ >) appears.
4.Press the A or 7 button to choose the interface that will use the PostScript CARD. (If your desired interface is displayed in step 3, ignore this step).
5.Press the b button to enter the printer mode option. You see the + icon, which means the displayed printer mode is currently selected.
6.Press the A or v button until the “+ PS” option appears.
7.Press the b button to set the PostScript mode.
8.Press the SelecType button three times to exit SelecType.
The PostScript mode remains in effect until you change the setting or turn off the printer. If you wish to make this setting permanent, use the