L-OFFSET

from -64 to -1

Makes fine adjustments in the horizontal

-0

printing position (left offset) on the page. The

from 1 to 63

setting is in dots; the size of each dot varies

 

depending on the printer. For example,

 

EPL-4100 is a 300-dpi printer, so the dot size is

 

1/300 inch (0.0846 mm). In this case, you can

 

use this submenu to move the printing on the

 

page approximately 1/5 inch to the left

 

(settings from -64 to -1) or to the right (settings

 

from 1 to 63). The factory setting is 0.

T-OFFSET

from -64 to -1

Makes fine adjustments in the vertical printing

-+O

position (top offset) on the page. The setting is

from 1 to 63

in dots; the size of each dot varies depending

 

on the printer. For example, the EPL-4100 is a

 

300 dpi printer, so the dot size is 1/300 inch

 

(0.0846 mm). In this case, you can use this

 

submenu to raise or lower the printing on the

 

page approximately 1/5 inch. The factory

 

setting is 0.

PAGETYPE

-3 FULL

Sets the memory area. Your printer maintains a

NOTE

memory area for processing printing data.

 

There are two sizes of memory area. If the

 

FULL option is selected, your printer maintains

 

a large memory area. If the NOTE option is

 

selected, it maintains a small memory area. If

 

you print on LG (legal), GLG (government

 

legal), or F4 size paper, you should expand

 

your printer’s memory or the image of your

 

output might be clipped.

2-6 Using the PostScript CARD