Removing the Card

Follow these steps if you need to remove the card:

1.Make sure the printer is turned off.

2.Remove the card by grasping it at the center and gently pulling it straight out.

Note: Never insert or remove the card while the printer is turned on.

3.Turn on the printer.

If the CH. (EPL-7000/7100) or the FEED light is flashing, press FEED; the printer then prints one page of data from the buffer.

Note: Never remove this card while the printer is on line, in SelecType mode, or while resetting. If you do, a REINSERT CARD, REMOVE CARD, or SERVICE REQ. message may appear on the display. See the section on card error messages in your printer manual.

Handing the PostScript CARD

1-7