Using Bindery Print Server (NetWare 3.x/4.x)
This section contains instructions on using the print server in the Print Server mode on NetWare 3.x/4.x/IntranetWare with Bindery emulation.
Note:
The print server in the Print Server mode of NetWare 3.x does not allow you to use the Print Server status display control with PCONSOLE.
1.Turn on your printer.
2.From any NetWare client, log in to the target NetWare server with supervisor privileges. You must log in with the bindery connection.
3.Configure the print server using EpsonNet WinAssist. See “NetWare” on page 62 for details.
If NetWare objects are already created, you can also use EpsonNet WebAssist (requires TCP/IP). See “NetWare” on page 205 for details.
6
6
6
6
6
6
6
6
6
6
6
Settings for NetWare Server | 135 |