To initialize your print server, follow the steps below.
1.Make sure that the printer with the print server is turned off.
2.While holding down the status sheet button, turn the printer on.
3.Hold down the status sheet button for about twenty seconds. The length of time necessary to hold down the status sheet button varies depending on the printer model. The red Status light and green Data light both turn on, indicating the print server is being initialized.
4.After the initialization is complete, press the status sheet button to print a status sheet. Check the information on the status sheet.
Note:
You can also initialize the print server using EpsonNet WinAssist, MacAssist, or WebAssist by clicking the Return to Default button.
12
12
12
12
12
12
12
12
12
12
12
Troubleshooting 229