List box

Displays network addresses and subnet masks that

 

have been registered.

 

 

Add button

Registers a network address (up to 20 addresses).

 

Do not add the network address if it is in the same

 

segment.

 

 

Remove button

Removes a network address and its subnet mask

 

from the List box.

 

 

Note:

❏If you try to add an incorrect network address, the following message appears: “The network address XXX.XXX.XXX.XXX that you entered will be added to the list as XXX.XXX.XXX.X. Add this address?” Check the correct network address and then click OK to add it.

❏If you try to add the same network address, the message “This network address has already been registered” appears, which indicates this address cannot be added.

Search Options-IPX

When you manage the print server with IPX (NetWare), and when you want to configure the print server outside of the local network, set the network address of the print server. Select Refresh from the View menu or restart EpsonNet WinAssist for the settings to take effect.

Note:

❏To use this option, you need to log in to the NetWare server as a supervisor.

❏When using a dial-up network, delete any unnecessary addresses from the Search Addresses list to prevent charges for any extra accounts.

54EpsonNet WinAssist Configuration Utility